Accessories
and Parts
| PLASMA
CDI Accessories |
|
If
you would like to place an order, click on
"PLASMA CDI Accessories" above to be
directed to the order page. |
| D1 |
PRE-WIRED
SIMPSON LCD DISPLAY AND ROTARY SWITCH- for use with
a
single
PLASMA CD
system |
$215.00 |
| A.D2 |
PRE-WIRED
SIMPSON
LCD DISPLAY AND ROTARY
SWITCH-
for use with
a
dual
PLASMA CD
system |
$265.00 |
 |
The Simpson digital
panel meter, available through Light Speed
Engineering, is a high quality LCD display pre-wired with a rotary
switch that allows you to select between the
3 outputs of the Plasma
system: RPM, Manifold Pressure, and Timing
Advance. (PN:
A.D1) |
If
you are using a Dual Plasma Ignition system,
the rotary switch will have 4 positions with
the following readouts: RPM, Manifold
Pressure, Timing Advance for system 1, and
Timing Advance for system 2. (PN:
A.D2)
The Plasma CD systems do not require the
display in order to function; it can be
added anytime.
Among the benefits of the digital display is
the responsive RPM indication, which will
display accurately down to 1 rpm
resolution. Moreover, the display may
prove useful for troubleshooting any engine
issues.
Another
option for Dual Plasma installations is to
have two single displays, one powered by
each Plasma system. This provides RPM,
MAP, and timing advance information
independently for each system and allows
both systems to be monitored simultaneously.
When
ordering a display, please specify the
following:
1. The desired cable length from your Plasma CD box location to
the display mounting location.
2. Whether you intend to use a
standard aircraft key switch to turn your
ignition system on and off. (i.e. Key
switch or toggle switch.) If so, the
length from the Plasma CD box location to
the key switch location.
3. If you are
ordering the display for a dual ignition system,
also specify the length between the output
connectors on the 2 Plasma CD boxes.
An
alternative installation may be to use three displays,
one for each function. Call for
pricing.
Display
specs:
Requires a panel cutout of 2.68" (68mm)
wide by 0.88" (22mm) high, and a panel
area of 2.84" (72mm) wide by
0.945" (24mm) high. The depth
behind the panel is 0.7"
(17.8mm). The front bezel protrudes
0.158" (4mm) from the front of the
mounting surface. The display will
snap into panels / mounting brackets from
0.050" to 0.125" thick.
The
display is for use with the Plasma II+ and
Plasma III ignition systems. Plasma I
systems have an output for timing advance
only so no selector switch is needed.
|
| A.S1 |
Single
Pole Single Throw (SPST) Sealed Toggle Switch,
MS24523 |
$19.00 |
|
A.S2
|
Three
Position Ignition / Start Switch:
Momentary ON for start, center position ON, down position OFF |
$35.00 |
Parts
| High
Tension Leads |
| If
you would like to place an order, click on
"High Tension Leads" above to be
directed to the order page. |
|
|
| P.HT1 |
Specify
your desired lead length from terminal to
terminal (center of the boot to center of
the boot). Leads will be made to your
length with terminals and boots installed.
Pricing listed is per lead. |
|
5"
- 23"
|
$17.37 |
|
23.1"
- 35"
|
$20.17 |
|
35.1"
- 47"
|
$22.97 |
|
47.1"
-59"
|
$25.77 |
| High
Tension Leads Components |
| If
you would like to place an order, click on
"High Tension Lead Components" above to be
directed to the order page. |
| 7.31 |
Black
wire spacers (pictured above) |
$1.25 |
| 7.32 |
Spark
plug wire heavy duty crimping ratchet |
$98.00 |
| IGN.WR |
Spark
plug wire, spiral core, bulk, per ft.
Minimum 50 ft. |
$2.80 |
| 7.3 |
Spark
plug wire boot and terminal, 90 degree, each |
$3.50 |
| 7.3-S |
Spark
plug wire boot and terminal, straight, each |
$3.75 |
| Other
Parts |
| If
you would like to place an order, click on
"Other Parts" above to be
directed to the order page. |
| 8.0 |
Ignition
coil, dual output, 5 oz., each |
$79.00 |
| 8.01 |
Ignition
coil mounting bracket with bolts |
$15.00 |
|
|
|
™
Accessories and Parts
Home
Ordering